FAQ

  • What is Travertine?
  • How do I care for Marble?
  • How do I clean my Granite countertops?
  • What is Travertine?



    Travertine stone is soft and delicate to look at. It breathes spaciousness. It's relaxed and soothing. The feeling is peaceful, tranquil, serene. It's a simple beauty. A casual formalness.



    The classic aged look of tumbled stone will warm your home. A polished or honed travertine becomes a bit more formal but yet, it's still inviting. The soft earthy hues of this natural stone truly keep it in tune with nature.



    Travertine stone is a form of limestone. It often forms near hot bubbly mineral rich springs. Gas bubbles become trapped and create a pitted surface on the stone. These pitted surfaces can be filled with an epoxy or dust resin. Filling the small holes and pits gives the travertine a more finished look. A refined beauty. The stone surface can also be left in its natural state with the small holes and pits unfilled. This is a warmer aged look which will acquire a beautiful patina over time. Leaving the stone unfilled will affect the durability. It will stain and attract dirt much easier than a filled travertine.



    This is a calcareous stone. It is highly reactive to the acids found in lemons, vinegar, alcohol, etc. These acids will etch the stone by leaving marks and rings. Similar to limestone, travertine also varies in hardness, density, and porosity. Some travertine stones are harder than others.



    It is usually a more porous stone than marble and needs to be sealed. If left untreated it will soak up liquids and water.



    This is also a softer natural stone. It will scratch. It's not as soft as soapstone but it can't compete with the hardness of granite. Travertine comes in all different sizes, from small mosaics, to 36"x36" tiles, to large heavy slabs.



    Travertine colors are in warm earthy tones. From the softest ivories to the palest creams. Rich shades of golden honey and silvery greens to deep mocha browns. Travertine never appears as one solid color. The color tones vary and veins or bands of contrasting color run throughout the stone. No two stones or tiles are alike.


    How do I care for Marble?

     


    Marble is stone that is generally polished and used in fine building work, furniture, or decorative art. It may be white or colored. It is porous, and easily stained. Marble is etched by acids. Wipe off anything spilled on marble immediately, as you would on a wood surface. Avoid setting beverage glasses directly on marble as they leave rings.



    Marble Furniture - Care and Cleaning



    Marble may be stone, but it is porous and stains easily. Wipe off anything spilled on marble immediately, just as you would from a wood surface. Use coasters under beverage glasses to avoid moisture rings.



    Regular Cleaning



    Occasionally wash marble surfaces with lukewarm water and wipe dry with a clean cloth. Wiping surface with a damp chamois will not leave streaks. Once or twice a year, depending on soil, wash with a mild detergent solution (hand dish-washing detergent and warm water), rinse and wipe dry.


    A light coat of wax will protect the surface of marble but is not considered essential. Use colorless wax. Don't wax white marble as it may tend to yellow it. A marble sealer can be applied to clean marble, which will protect from staining and allow soil to be wiped off with a damp cloth.



    Special Cleaning



    Marble which has become dull can be livened up by using a commercial marble cleaner and polish. Buy from a company that sells marble. Companies generally carry imported polish-cleaners, which are used on softer imported marbles and hence safe for the harder U.S. marble. They work faster and easier than the old "marble care kits" which used to be distributed by marble companies.


    Putty powder (tin oxide) can be used to polish dulled or etched surfaces, rubbing on with a damp cloth, folding and refolding to clean damp areas, and preferably using an electric polisher for buffing. However it's very hard to find. Severely damaged surfaces, scratched or etched, can be polished by a business making and selling tombstones or other marble products.



    Stain Removal



    Make a poultice from white absorbent material such as a napkin, blotter, paper towel or facial tissue, dampened with the chemical recommended below to dissolve that stain; or mix whiting with that chemical to make a soft paste to cover the stain. The poultice should be left on the stain from 1 hour up to 48 hours, depending on the age and depth of the stain. Plastic wrap, held in place by masking tape, can be put over the poultice to keep it damp; otherwise it will have to be re-dampened with the chemical periodically. Mix only enough poultice for immediate use; mix a second batch later if another application is needed.



    Organic Stains:



    Tea, coffee, colors bleached from paper, textiles or soft drinks. Make poultice soaked with 20 percent peroxide (hair bleaching strength) and a few drops of ammonia.



    Oil Stains:



    Oil stains may include butter, hand cream or lotion. As soon as possible, spread surface with an absorbent fine powder such as whiting or even corn starch. After short time brush to remove and reapply more powder. Let stand 24 hours. To remove: Scrub with hot, sudsy (detergent) solution and stiff brush. Or wipe with ammonia-dampened cloth. In either case, then rinse and wipe dry. If these alkaline solutions don't remove all the oil, you can try a solvent. Make a poultice dampened with acetone or amyl acetate (available at drug stores), or with home dry cleaning fluid. Use good ventilation with windows open to remove fumes, do not use near spark or flame, and do not leave on too long.



    Rust Stains:



    Usually the result of metal items such as a lamp, metal container in which plant is placed etc. Use a commercial rust stain remover. Follow directions exactly and do not leave on surface very long as acid in many rust removers can etch the surface.


    Acids Fruit juice, carbonated beverages or other acids will etch (remove shiny surface) if allowed to remain on marble. Wipe up acid spill immediately, and wipe surface with wet cloth. If surfaced is etched, polishing may be required.


    How do I clean my Granite countertops?

    Granite countertops are popular with home owners and interior designers, not only because of their intrinsic beauty and style, but more so because of their resistance to damage and their enduring quality. But despite their natural strength, proper granite countertops care has to be practiced to ensure their long life and dependability.


    There are two essential aspects you must know with regard to proper granite countertops care. These are the short-term and long-term granite countertops care.


    When we say short-term granite countertops care, this is just the daily wiping and cleaning of your countertops. Most people would assume that plain wiping with a cloth and cleaner would do. Well, this is actually true. You don’t need to have special skills or expensive products to go about the daily cleaning of your granite countertops. You don’t even need to wipe very hard. Light wiping or dusting is sufficient granite countertops care.


    However, you must be careful about the kind of cleaner you use. Granite countertops are coated with a sealant that protects the stone from stains and discoloration. Most cleaners are too acidic and may cause damage to the sealant. This will allow chemicals to seep in through the pores of the granite, and this, in turn, causes the discoloration. Many non-acidic cleaners are available in the supermarket, and you should use one of these for your daily cleaning.


    The second part of granite countertops care involves long-term effects, and is only done about twice a year. We are talking about reapplying the sealant of your countertop. Even if you are careful in wiping your granite tiles, the sealant still wears off after long periods, and you will need to apply a new coat to maintain the quality of your countertop.


    To find out where to buy a good granite countertop sealant, the best place to ask is at your countertop dealer. They will be able to recommend excellent products to you. If you want to use something cheaper, you can also apply a coat of regular car wax. This is an effective sealant for your granite countertops, and in most cases, costs a lot less than special granite sealants as well.


    Applying the sealant does not take too much time or effort. You can do this yourself in just a short amount of time. It's just as simple as applying wax on your car.


    Now you know the two important things about granite countertops care. Just make sure you do them well, and we guarantee you that your granite countertops will last you a lifetime.